Stuart's Ferguson F20320DTR Forum

Previous Topic | Forum Index

display shows Ft1 and stops

Posted by private, Wed 20 Feb 2013 10:05 am
Ferguson F20320DTR Digiatl recorder When powering up, the display shows Ft1 and stops. Is this terminal? Do I need to buy a new recorder?

If you find this information useful, please consider supporting this website.

Posted by StuartDalby, Thu 21 Feb 2013 9:29 am
Hi Robert,

I have not seen this error before myself but have done a little internet research.

I think the F20320DTR may be based on the same electronics as some Hitachi DTRs and they appear to also produce the "FT 1" error. See . In that case the error cleared itself after being turned off and on a few times and so obviously was not a terminal error message in that case. Worth a try.

I suspect it could be a problem with the power supply.

Let me know how you get on,

Want to add a reply? Contact Me